Yealink SIP-T2 Series Administrator's Manual page 405
Hide thumbs
Also See for SIP-T2 Series:
- Administrator's manual (1108 pages) ,
- Auto provisioning manual (241 pages) ,
- Provisioning manual (231 pages)
Table of Contents
Advertisement
Parameters
Web User Interface:
Settings->TR069->Periodic Inform Interval (seconds)
Phone User Interface:
None
To configure TR-069 via web user interface:
1.
Click on Settings->TR069.
2.
Select Enabled from the pull-down list of Enable TR069.
3.
Enter the user name and password authenticated by the ACS in the ACS Username
and ACS Password fields.
4.
Enter the URL of the ACS in the ACS URL field.
5.
Select the desired value from the pull-down list of Enable Periodic Inform.
6.
Enter the desired time in the Periodic Inform Interval (seconds) field.
7.
Enter the user name and password authenticated by the IP phone in the
Connection Request Username and Connection Request Password fields.
8.
Click Confirm to accept the change.
IPv6 is the next generation network layer protocol, designed as a replacement for the
current IPv4 protocol. IPv6 is developed by the Internet Engineering Task Force (IETF) to
deal with the long-anticipated problem of IPv4 address exhaustion. IPv6 uses a 128-bit
address, consisting of eight groups of four hexadecimal digits separated by colons. VoIP
network based on IPv6 can ensure QoS, a set of service requirements to deliver
performance guarantee while transporting traffic over the network.
Configuring Advanced Features
Permitted Values
Default
393
Advertisement
Table of Contents
