Yealink SIP-T2 Series Administrator's Manual page 210

Administrator's Guide for SIP-T23 & T23P & T23G IP Phones
To configure call forward in custom mode via phone user interface:
1. Press Menu->Features->Call Forward.
2. Press
3. Press
soft key.
4. Depending on your selection:
a) If you select Always Forward, you can configure it for a specific account.
1) Press
Always field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward to field.
3) (Optional.) Enter the always forward on code and off code respectively in the
On Code and Off Code fields.
You can also configure the always forward for all accounts. After the always
forward was configured for a specific account, do the following:
1) Press
2) Press the All Lines soft key.
The LCD screen prompts "Copy to All Lines?".
3) Press the OK soft key to accept the change.
b) If you select Busy Forward, you can configure it for a specific account.
1) Press
Busy field.
2) Enter the destination number you want to forward all incoming calls to when
the IP phone is busy in the Forward to field.
3) (Optional.) Enter the busy forward on code and off code respectively in the
On Code and Off Code fields.
You can also configure the busy forward for all accounts. After the busy forward
was configured for a specific account, do the following:
1) Press
2) Press the All Lines soft key.
The LCD screen prompts "Copy to All Lines?".
3) Press the OK soft key to accept the change.
c) If you select No Answer Forward, you can configure it for a specific account.
1) Press
No Answer field.
2) Enter the destination number you want to forward all unanswered incoming
calls to in the Forward to field.
3) Press
forwarding from the After Ring Time field
198
or to select the desired account, and then press the Enter soft key.
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select the desired value from the
or to highlight the Always Forward field.
or , or the Switch soft key to select the desired value from the
or to highlight the Busy Forward field.
or , or the Switch soft key to select the desired value from the
or , or the Switch soft key to select the ring time to wait before