Table of Contents
Advertisement
3 Now take the small roll and lay it in the front
ink fi lm compartment. Make sure that the
blue toothed wheel is on the right and the pin
on the left is inserted in the depressions.
4 Turn small roll forward to tension the ink fi lm.
Make sure that the ink fi lm is not creased.
5 Break out the new «Plug'n'Print» card and
insert it in the slot to the left of the ink fi lm
compartments.
6 Close the machine by swinging the operation
panel forward, until it snaps in.
8
Loading paper
Before you can copy documents, paper must
be loaded in your fax machine. Please use
only the following paper format: standard
A4 210 × 297 mm. The fax machine works with
normal paper used for writing and copying and
has been optimised for smooth 80g/m
The smoother the paper surface the better the
print quality.
1 Open the cover (1) by lifting the recesses
(handles) (2).
1
2a If you want to use the paper feeder for only a
short while, fl ip up the paper support. In this
case, you can insert up to 15 sheets of paper.
2b If you will be using the paper feeder cons-
tantly, fl ip the paper refi ll fl ap forwards and
insert the paper holder in the appropriate ho-
les behind the paper feeder. In this case, you
can insert up to 50 sheets of paper.
2
paper.
2
2
Advertisement
Table of Contents
