User Manual
3.10
Line Settings
Some advanced settings can be configured on a per line basis.
To administer these settings click Input Lines ‐> Line x
Access PIN – Telephone Router can optionally require an access code to be entered before a call will be
processed as a security feature. Enter a four digit PIN here, or leave the field blank for no PIN.
Priority Calls – Ticking this option means that all calls dispatched from this line will be priority messages.
This only occurs if the Telephone Router is operating in distributed mode.
Messages Per Call – The maximum number of messages that can be dispatched per call to this line.
Max Message Length – This is the maximum number of characters that a message can be when sent via
this line.
© JTECH Communications, Inc.
Telephone Router
Page 25