Connectors; Rear Panel; Mains Input- Rear - JTECH TITAN User Manual

Telephone Router
1.3.2 Connectors
All the front connectors are of RJ45 type (8 pin ‐ socket) except for the phone connectors
which are RJ12 type (4pin ‐ socket)
Pin numbers, socket view, viewed from the front of the unit.
RS232 Serial Port Connector (COM 1)
Phone Line Connectors (Line 1,2,3)
1.4 Rear Panel
1.4.1 Mains Input‐ Rear
This IEC connector is used to supply power to the unit. You can plug 110‐240VAC 50/60Hz
into here without the need to change power supplies or settings (input is auto‐sensed). You
will have been supplied with a mains lead in the Telephone Router kit which will plug
straight into this connector.
Page 10
RJ45
Pin Name Dir
1 DSR/RI IN
2 CD IN
3 DTR OUT
4 GND
5 RXD IN
6 TXD OUT
7 CTS IN
8 RTS OUT
Pin No. Name
1 NC
2 Tip
3 Ring
4 NC
RJ12
Description
Data Set Ready / Ring Indicator
Carrier Detect
Data Terminal Ready
System Ground
Receive Data
Transmit Data
Clear to Send
Request to Send
Description
Tip
Ring
User Manual
© JTECH Communications, Inc.