JTECH TITAN User Manual page 18

Telephone Router
•
IPv6 enabled – IPv6 (Internet Protocol Version 6) is the latest level of the Internet
Protocol. IPv6 was designed as an evolutionary set of improvements to the current
IP Version 4. The most obvious improvement in IPv6 over the IPv4 is that IP
addresses are lengthened from 32 bits to 128 bits. This extension anticipates
considerable future growth of the Internet and provides relief for what was
perceived as an impending shortage of network addresses. Your Telephone Router
supports IPV6 for future compatibility. This field is normally set to No.
•
Syslog enabled – Syslog is a simple way of performing logging of some of the
Telephone Router's activities. This includes when users log on/off, when a gateway
goes up/down or when certain settings are changed such as IP Settings.
The Telephone Router will need a network connection and a Syslog server on the
network in order to use this function. If this function is required enter the IP
Address of the Syslog server in the field below.
The TITAN CD contains a freeware Syslog server that you can use to log these
messages.
•
Ethernet stats – Click this button to view statistics regarding the ethernet port.
•
Network stats – Click this button to view statistics regarding the network.
When finished making changes on this page, click
Page 18 © JTECH Communications, Inc.
User Manual
to save all new settings.