Active Multicontour Seat - Mercedes-Benz S-Class Operator's Manual

Seats
134
The supplementary cushion is attached to the
head restraint by three press studs.
Installing the supplementary cushion:
Position the head restraint as far forwards
X
as possible (
Y
Hold supplementary cushion ; against
X
the head restraint and push press studs :
into the counterpieces.
Removing the supplementary cushion:
Position the head restraint as far forwards
X
as possible (
Y
Release press studs : and remove sup-
X
plementary cushion ;.
Adjusting the rear center head
restraints
Retracting and extending electrically
Press and hold button : until the head
X
restraint has fully extended or retracted.
Folding into position mechanically
Pull the head restraint up until it engages.
X
page 123).
page 123).
Adjusting the multicontour seat
The settings for the multicontour seat are
only activated if:
the seat is occupied
R
the seat belt is fastened.
R
The multicontour seat can be adjusted using
COMAND (see the separate operating
instructions).
Adjusting the active multicontour
seat
The settings for the active multicontour seat
are only activated if:
the seat is occupied
R
the seat belt is fastened.
R
Vehicles installed with the Seat Comfort
package: you can adjust the active multicon-
tour seat for the driver and front passenger
with COMAND (see the separate operating
instructions).
Multicontour seat in the rear
You can adjust the multicontour seats for the
outer seats using the remote control (see the
separate operating instructions).
Adjusting the 4-way lumbar support
The 4-way lumbar support can be adjusted
with COMAND (see the separate operating
instructions).
Switching the seat heating on/off
Switching on/off
G WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited