Active Multicontour Seat - Mercedes-Benz 2012 E-Class Sedan Operator's Manual

Seats
102
Adjusting the rear seat head restraint
height
Example: Sedan
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : and push
the head restraint down until it is in the
desired position.
i If you pull the head restraint forward
slightly, the effort required to adjust it is
reduced.
Removing and installing rear head
7
restraints
G
WARNING
Occupants should only travel sitting on seats
which have the head restraints installed. In
the event of an accident, this reduces the risk
of injury for passengers seated in the rear
compartment.
Example: Sedan
7 Only for vehicles with through-loading facility.
X
Release the rear seat backrest and fold it
slightly forwards (
X
To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To re-install: insert the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.
X
Fold back the rear seat backrest until it
engages.
Adjusting the active multicontour
seat
The active multicontour seat on the driver's
side automatically adapts the sides of the
backrest to your current driving style. You can
adjust the contour of the seats individually so
as to provide optimum support for your back
and sides.
To adjust the seat cushion length
:
To switch the dynamic function on or off
;
To adjust the side bolsters of the seat
=
backrest
To switch the massage function on or off
?
To adjust the contour of the backrest to
A
increase/decrease support
To adjust the height/depth of the
B
backrest contour
I n f o r m a t i o n P r o v i d e d b y :
Y page 279).