Memory Function In The Rear Compartment - Mercedes-Benz S-Class Operator's Manual

WARNING
G
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
General notes
The settings for the rear seat and the front-
passenger seat can be stored using the rear-
compartment memory function.
If the indicator lamp in the v button is
R
not lit, store the rear seat settings.
If the indicator lamp in the v button
R
lights up, store the front-passenger seat
and rear seat settings. Both the front-
passenger and rear seat are taken into
account with this setting. Depending on the
equipment in the vehicle, two or three
memory positions can be stored for the
front-passenger and rear seats.
Storing settings
General notes
With the memory function in the rear, you can
store up to three different settings, e.g. for
three different people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
multicontour seat: the seat cushions of the
R
backrest as well as the contour of the back-
rest in the lumbar and shoulder regions
seat heating: distribution of the heated sec-
R
tions of the seat cushion and backrest if the
indicator lamp in the v button is not lit.

Memory function in the rear compartment

The following settings are stored to a memory
position, if the indicator lamp in the v
button lights up:
position of the footrest for the front-
R
passenger seat, if available
position of the screen, if available
R
Vehicles without rear reclining seat
Selects rear-compartment seat
Press button v repeatedly until the indi-
X
cator lamp in the button is not lit.
The rear-compartment seat is selected if
the indicator lamp in the button is not lit.
Adjust the rear seat accordingly
X
( page 123).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected stor-
age position.
To select the front-passenger seat and
rear-compartment seat
Press button v repeatedly until the indi-
X
cator lamp in the button is not lit.
The rear-compartment seat is selected if
the indicator lamp in the button is not lit.
Adjust the rear seat accordingly
X
( page 123).
Y
Press button v repeatedly until the indi-
X
cator lamp in the button lights up.
The front-passenger seat is selected if the
indicator lamp in the button lights up.
145
Z