Seats, Steering Wheel And Mirrors - Mercedes-Benz S-Class Operator's Manual

Memory function in the rear compartment
144
WARNING
G
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
Storing settings
The memory function is only available in vehi-
cles with the memory package.
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
seat, backrest, head restraint position and
R
contour of the backrest in the lumbar
region
active multicontour seat: side bolsters of
R
the backrest, shoulder of the backrest, con-
tour of the backrest, dynamic function level
seat heating: distribution of the heated sec-
R
tions of the seat cushion and backrest
driver's side: position of the exterior mir-
R
rors on the driver's and front-passenger
sides
Adjust the seat accordingly (
X
On the driver's side, adjust the steering
X
wheel ( page 137) and the exterior mirrors
Y
( page 141).
Y
Press memory button M and one of the
X
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
Calling up a stored setting
Press and hold the corresponding storage
X
position button 1, 2 or 3 until:
Seat
R
Steering wheel
R
Exterior mirrors
R
are in the stored position.
i
If you release the storage position button,
the seat, steering wheel and mirror setting
functions stop immediately. The multicon-
tour seat setting or the 4-way lumbar sup-
port is still carried out.
Memory function in the rear compart-
ment
Important safety notes
G WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
page 122).
Y