Keyless-Go Start Function - Mercedes-Benz S-Class Operator's Manual

SmartKey
92
To unlock the vehicle: touch the inner
X
surface of the door handle.
To lock the vehicle: touch sensor sur-
X
face : or ;.
Make sure that you do not touch the inner
surface of the door handle.
Convenience closing feature: touch
X
recessed sensor surface ; for an exten-
ded period.
Further information on the convenience
closing feature (
To unlock the trunk lid: pull the handle on
X
the trunk lid.
Deactivating
If you do not intend to use the vehicle for a
longer period of time, you can deactivate KEY-
LESS-GO. The SmartKey will then use very lit-
tle power, thereby conserving battery power.
For the purposes of activation/deactivation,
the vehicle must not be nearby.
To deactivate: press the & button on
X
the SmartKey twice in rapid succession.
The battery check lamp of the SmartKey
lights up twice briefly and KEYLESS-GO is
deactivated.
To activate: press any button on the
X
SmartKey or insert the SmartKey into the
ignition lock.
KEYLESS-GO and all of its associated fea-
tures are available again.
page 108).
Y

KEYLESS-GO start function

Bear in mind that the engine can be started by
any of the vehicle occupants if there is a
SmartKey in the vehicle.
Changing the settings of the locking
system
You can change the settings of the locking
system. This means that only the driver's door
and the fuel filler flap are unlocked when the
vehicle is unlocked. This is useful if you fre-
quently travel on your own.
To change the setting: press and hold
X
down the % and & buttons simulta-
neously for approximately six seconds until
the battery check lamp flashes twice
( page 94).
Y
i
If the setting of the locking system is
changed within the signal range of the vehi-
cle, pressing the & or % button:
locks or
R
unlocks the vehicle
R
The SmartKey now functions as follows:
To unlock the driver's door: press the
X
% button once.
To unlock centrally: press the % but-
X
ton twice.
To lock centrally: press the & button.
X
The KEYLESS-GO function is changed as fol-
lows:
To unlock the driver's door: touch the
X
inner surface of the door handle on the
driver's door.
To unlock centrally: touch the inner sur-
X
face of the door handle on the front-
passenger door or the rear door.
To lock centrally: touch the outer sensor
X
surface on one of the door handles.
To restore the factory settings: press
X
and hold down the % and & buttons
simultaneously for approximately six sec-