General Notes - Mercedes-Benz S-Class Operator's Manual

To open: pull handle : on the cover.
X
Fold the cover out to the front.
X
To switch cooling level to low: press but-
X
ton ; once.
An indicator lamp in the button lights up.
To switch cooling level to high: press
X
button ; twice.
Both indicator lamps in the button light up.
To switch off cooling: press button ;
X
repeatedly until the indicator lamps go out.
The cooling output of the coolbox depends on
the ambient temperature and the selected
cooling level.
The coolbox reduces its cooling output or
switches off, if:
many electrical consumers are turned on
R
the starter battery is not sufficiently
R
charged
This is indicated by the flashing indicator
lamps in the button. The cooling function will
automatically switch back on as soon as there
is sufficient voltage.
Caring for the coolbox
If you do not need to use the coolbox for an
extended period you should switch it off,
defrost it and clean it. After doing so, leave
the lid open for a time.
Removing and installing the coolbox
You can remove the coolbox for maintenance
purposes.
To remove: switch off the coolbox.
X
Pull plug ; down and out.
X
Unscrew both screws =.
X
Pull out the coolbox.
X
Close flap :.
X
To install: swing flap : to the side until it
X
is locked in place by the magnets.
Insert the coolbox.
X
Tighten both screws =.
X
Connect plug ;.
X
mbrace

General notes

The mbrace system is only available in the
USA.
You must have a license agreement to acti-
vate the mbrace service. Make sure that your
system is activated and operational. To log in,
press the ï MB Info call button. If any of
the steps mentioned are not carried out, the
system may not be activated.
If you have questions about the activation,
contact one of the following telephone hot-
lines:
Mercedes-Benz Customer Assistance Center
at 1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
Features
389
Z