Active Multicontour Seat - Mercedes-Benz S-Class Operator's Manual

Seats
106
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating mate-
rials, e.g. blankets, coats, bags, seat cov-
ers, child seats or booster seats.
! Make sure that there are no objects in the
footwell under or behind the seats when
moving the seats back. There is a risk that
the seats and/or the objects could be dam-
aged.
Information in the Digital Operator's
Manual
In the Digital Operator's Manual you will find
information on the following topics:
Adjusting the seats
R
Adjusting the rear seat
R
Chauffeur mode
R
Adjusting the head restraints
R
Adjusting the multicontour seat
R
Adjusting the active multicontour seat
R
Adjusting the 4-way lumbar support
R
Switching the seat heating on/off
R
Switching the seat ventilation on/off
R
Setting the memory function
R
Switching the seat heating on/off
Activating/deactivating
G WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited
ability to react to excessively high tempera-
tures may be affected or they may even suffer
burn-like injuries. There is a risk of injury.
Therefore, do not switch the seat heating on
repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
The system automatically switches down
from level 3 to level 2 after approximately
eight minutes.
The system automatically switches down
from level 2 to level 1 after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level 1.
Vehicles with the Seat Heating Plus package:
you can set the distribution of the heated
sections of the seat cushion and backrest via
COMAND (see the Digital Operator's Man-
ual).
Front seats
Turn the SmartKey to position 1 or 2 in the
X
ignition lock ( page 125).
Y
To switch on: press button : repeatedly
X
until the desired heating level is set.
To switch off: press button : repeatedly
X
until all the indicator lamps go out.
i
If the battery voltage is too low, the seat
heating may switch off.