Activating/Deactivating - Mercedes-Benz S-Class Operator's Manual

Menus and submenus
310
Press a to confirm.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
When Active Blind Spot Assist is activated,
gray radar waves propagating backwards
appear next to the vehicle in the
tance Info Display tance Info Display
function display.
For further information about Active Blind
Spot Assist, see (
Setting ATTENTION ASSIST
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
sist sist submenu.
Press a to confirm.
X
Press the : or 9 button to select
X
Attention Assist Attention Assist.
Press a to confirm.
X
Press the : or 9 button to set
X
Standard Standard or
Press the a button to confirm the selec-
X
tion.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the
Graphic Graphic menu in the multifunction display
when the ignition is on.
For further information about ATTENTION
ASSIST, see (
Y
Activating/deactivating Active Lane
Keeping Assist
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Assis‐ Assis‐
menu in the multi-
page 270).
Y
Settings Settings menu.
DriveAs‐ DriveAs‐
Sensitive Sensitive.
Assistance Assistance
page 264).
Settings Settings menu.
Use : or 9 to select the
X
sist sist submenu.
Press a to confirm.
X
Press the : or 9 button to select
X
Lane Keeping Lane Keeping Assist
Press a to confirm.
X
The current selection
tive tive is displayed.
To change the setting: press a again.
X
For further information about Active Lane
Keeping Assist, see (
Hybrid submenu (plug-in hybrid vehi-
cles)
Setting the maximum charge current
Before charging the high-voltage battery,
check the maximum permissible charge cur-
rent for the relevant power socket.
If there are no charge current settings on the
charging cable, set the maximum charge cur-
rent.
The maximum charge current values in the
on-board computer may deviate from the
charging cable values.
Off Off,
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
menu.
Press a to confirm.
X
Press : or 9 to select the
X
Charge Current Charge Current
You will see the selected setting.
Press the a button to save the setting.
X
Setting the departure time
With the Departure Time Departure Time
set the time by which pre-entry climate con-
trol is to be complete and the high voltage
battery fully charged.
DriveAs‐ DriveAs‐
Assist.
Standard Standard or Adap‐ Adap‐
page 273).
Y
Settings Settings menu.
Hybrid Hybrid
Maximum Maximum
function.
function you can
sub-