Setting The Position - Mercedes-Benz S-Class Operator's Manual

If a departure time is pre-selected, charging
starts immediately. Further information can
be obtained at any qualified specialist work-
shop.
Pre-entry climate control depends on the
departure time set. Further information on
pre-entry climate control (
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
menu.
Press a to confirm.
X
Press : or 9 to select the
X
ture Time ture Time function.
You will see the selected setting.
Press the a button to save the setting.
X
Immediate charging without any depar-
X
ture time set: use : or 9 to select
No No Pre-selection Pre-selection.
Press a to confirm.
X
or
To set the departure time: use : or
X
9 A A , B B or C C to select the required storage
space.
Press the a button to confirm the selec-
X
tion.
Press : or 9 to set the hours.
X
Press a to confirm.
X
Press : or 9 to set the minutes.
X
Press a to confirm.
X
If the transmission is in position P and the
charging cable connector is plugged in, the
multifunction display will show the com-
plete charging prediction after a few
moments.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
( page 210).
Y
page 182).
Y
Settings Settings menu.
Hybrid Hybrid sub-
Depar‐ Depar‐
Menus and submenus
Head-up display submenu
Switching other displays on/off
You can switch the display of additional infor-
mation on and off in the on-board computer. If
the head-up display (
Y
this will be shown on the windshield.
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Head-up Display Head-up Display
Press a to confirm.
X
Press the : or 9 buttons to select
X
Display Content Display Content.
Press a to confirm.
X
Switching the navigation messages dis-
play on/off
Press the a button to save the setting.
X
When you switch on the
sages sages display, navigation messages are
shown on the windshield when the head-up
display is activated.
Further information on navigation (see the
separate operating instructions).

Setting the position

You can adjust the position of the head-up
display. This allows you to compensate for
differences in the seat position.
Switch on the Head-up display
X
( page 297).
Y
Use ò on the steering wheel to call up
X
the list of menus.
Press the : or 9 button on the steer-
X
ing wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use the : or 9 button to select the
X
Head-up Display Head-up Display
Press a to confirm.
X
page 297) is activated,
Settings Settings menu.
submenu.
Navigation Mes‐ Navigation Mes‐
Settings Settings menu.
submenu.
Z
311