Engaging Drive Position - Mercedes-Benz S-Class Operator's Manual

Automatic transmission
198
If the transmission is in position D or N:
X
push the DIRECT SELECT lever up past the
first point of resistance.
If the transmission is in position P: depress
X
the brake pedal and push the DIRECT
SELECT lever up past the first point of
resistance.
The ECO start/stop function is not available
when reverse gear is engaged. Further infor-
mation on the ECO start/stop function
( page 193).
Y
Shifting to neutral N
G WARNING
If children are left unsupervised in the vehicle,
they could:
open the doors, thus endangering other
R
people or road users.
get out and disrupt traffic.
R
operate the vehicle's equipment.
R
Additionally, children could set the vehicle in
motion if, for example, they:
release the parking brake.
R
shifting the automatic transmission out of
R
park position P
Start the engine.
R
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
If the transmission is in position D or R:
X
push the DIRECT SELECT lever up or down
to the first point of resistance.
If the transmission is in position P: depress
X
the brake pedal and push the DIRECT
SELECT lever up or down to the first point of
resistance.
If the engine has been switched off, the auto-
matic transmission automatically shifts to N.
If the automatic transmission is to remain in
neutral N, e.g. for washing the vehicle in car
washes with a towing device, please observe
the following instructions:
Using the SmartKey:
Make sure that the ignition is switched on.
R
When the vehicle is stationary, depress the
R
brake pedal and keep it depressed.
Shift to neutral N.
R
Release the brake pedal.
R
If the electric parking brake is engaged,
R
release it.
Switch off the ignition and leave the Smart-
R
Key in the ignition lock.
With the Start/Stop button:
Make sure that the ignition is switched on.
R
When the vehicle is stationary, depress the
R
brake pedal and keep it depressed.
Engage park position P.
R
Release the brake pedal.
R
Pull the Start/Stop button out of the igni-
R
tion.
Insert the SmartKey into the ignition lock.
R
Switch on the ignition.
R
Depress the brake pedal and keep it
R
depressed.
Shift to neutral N.
R
Release the brake pedal.
R
If the electric parking brake is engaged,
R
release it.
Switch off the ignition and leave the Smart-
R
Key in the ignition lock.
Engaging drive position D
If the transmission is in position R or N:
X
push the DIRECT SELECT lever down past
the first point of resistance.
If the transmission is in position P: depress
X
the brake pedal and push the DIRECT
SELECT lever down past the first point of
resistance.