Event; Schedule - Vitek VT-16HD2A-NH Manual

6.7.2 EVENT

When event is triggered, you can configure recording condition.
MOTION EVENT: Configure recording condition when motion triggered.
ETC EVENT: Configure recording condition for Alarm / V-Loss occurred.
FPS: NTSC: Configure frame rate of 0 / 1 / 2 / 4 / 5 / 8 / 15 /30 at NTSC Mode or 0
Ø
/ 1 / 2 / 4 / 5 / 7 / 13 / 25 in PAL mode.
QUALITY: Configure video quality of 5 levels: Low / Standard / High / Highest /
Ø
Super.
Audio: If you select "ON", audio data will be recorded.
Ø
Recoding resolution for the event record mode follows the size in the CONTINUOUS
record setting.

6.7.3 SCHEDULE

67