Ptz Setting - Planet ICA-3350V User Manual

Add and Delete
Name
Level

3.6.3. PTZ Setting

This page allow user to modify the RS-485 interface according to the P/T scanner.
Camera Protocol
Camera Address
Baud rate
NOTE
To add or delete the privacy mask windows, user can specify up to 7
windows to mask the video captured by this device. By dragging
mouse on the image, you can change the position and size of the
selected window accordingly.
Name of the specified privacy window
To define the gray level of mask block. The smaller value will be
darker.
This device can connect to a PTZ camera or speed dome camera and
controls them thru RS-485 interface.
This is the camera ID set in PTZ camera or speed dome camera.
Note that please DO NOT changes the default value if unnecessary.
If so, user needs to check and set value properly for both sides.
This is the communication speed between network module and P/T
scanner.
If need to change these parameters, user needs to check and set
value properly for both, network module and P/T scanner.
51