Piranhamax Portable Case Assembly - Humminbird PiranhaMAX 155 Installation And Operation Manual

PiranhaMAX Portable Case Assembly

It is important to perform the PiranhaMAX portable case assembly tasks in
order, referring to the step-by-step procedures that represent the following
main assembly tasks:
• assemble the PiranhaMAX mount
• assemble the base and handle
• assemble the control head to the base and handle
• route the cables in the base
• assemble the portable case
• charge and install the battery
• assemble the transducer mounting bracket
• stow the portable transducer and battery charger into the portable case.
When you are done, the control head and the transducer will be part of the
portable case assembly, and you will be ready to take your portable case to the
boat for final setup.
Supplies: In addition to the hardware supplied with your installation kit, you
will need a hammer, Phillips screwdriver, socket wrench, and a rope or bungee
cord.
23
PiranhaMAX Portable Case Assembly