Power ON and OFF
Use the following instructions to power on your PiranhaMAX unit:
NOTE: International units powered on for the first time will first display setup menu
options such as Language, Units - Distance, Units - Speed, etc. for initial system setup.
NOTE: If Simulator Mode is selected from the Start-Up Menu and a transducer is
plugged in, some menu setting changes will be saved in memory even after the unit
is powered down. Menu setting changes will not be saved when a transducer is not
connected.
display
LEFT arrow key
POWER/MENU key
• Power On: Press the POWER-MENU key until the
PiranhaMAX powers on, then release the key.
• Start-Up Menu: When the PiranhaMAX powers on, the
Start-Up menu temporarily appears. From this menu,
select either Start-Up, Simulator, or Setup.
• For on the water use, select Normal.
• To learn how to use the system with simulated
data, select Simulator.
• Power Off: Press and hold the POWER-MENU key until
the unit powers off.
39
RIGHT arrow key
Power ON and OFF