Humminbird PiranhaMAX 155 Installation And Operation Manual page 36

3. Connect the cables to the control
head. The slots for the plugs are
keyed
installation, and insertion should
be easy. Do not force the
connectors into the control head.
(Figure 38)
4. Pull the power cable through the
opening in the long side of the
cable well and insert it into the
battery well (see the illustration
Installing the Cables Onto the
Base).
5. Route the transducer jumper
cable (see
Installing the Cables Onto the
Base) out the long side of the
cable well and follow the arrows
on the base.
transducer
jumper
cable
PiranhaMAX Portable Case Assembly
to prevent
the illustration
Installing the Cables Onto the Base
Figure 39
Connecting the Cables to the Control Head
reverse
Figure 38
power cable
28
screws
jumper
cable well