EUROCOM M4 User Manual page 139

25. Press <Esc> to exit the menu.
26. Go to the Boot menu and make sure your attached DVD drive is set as Boot
Option #1 in Boot Option Priorities.
27. Press <F4> and <Yes> to "Save Changes and Reset", however ensure that the
two conditions in the bulleted points below are met before doing so.
• Make sure the Windows 8.1 OS DVD is in the attached DVD drive. and as the
computer starts up it will automatically boot from the Windows 8.1 OS DVD
(you will be prompted to press a key to boot from the DVD).
• Make sure your USB Flash drive or external USB hard disk is attached to one of
the USB ports on the computer.
28. Press <F7> as the computer starts up to bring up the boot device menu.
29. Select the DVD drive containing the Windows 8.1 OS DVD and press <Enter>.
30. Press a key at system startup to begin installing Windows from your Microsoft
Windows 8.1 disc.
31. Click Next > Install Now to continue installing the operating system as normal
(see your Windows documentation if you need help on installing the Windows
OS).
32. A prompt will appear to ask you to Load Driver.
Setting Up SATA RAID or AHCI Mode 7 - 9
Modules
Figure 7 - 5
Boot Option
Priorities (Set
Attached DVD Drive
as Option #1)
7