Table of Contents
Advertisement
SmartNode 4300 Series User Manual
Voice connectivity - FXS
2-wire Loopstart
Short haul loop 1.1 km @3REN
EuroPOTS (ETSI EG201 188)
Programmable AC impedance, feeding, and ring voltage; on-hook voltage 48 VDC
Caller-ID Type-1 FSK and ITU V.23/Bell 202 generation
Voice connectivity - FXO
2-wire Loopstart, RJ-11/12
EuroPOTS (ETSI EG201 188)
Programmable AC terminantion
Programmable DC terminantion
Ethernet interface
The SN4300 series has one 10/100-Mbps Ethernet port presented on an RJ-45 connector supporting:
•
100Base-TX half-/full-duplex operation
•
10Base-TX half-/full-duplex operation
•
Auto detection and fallback
Console port
The RS-232 port provides for initial configuration of the Model SN4300 series. The RS-232 port supports:
•
Asynchronous data rate of 9600 bps, 2 bits, no parity, 1 stop bit, no flow control
•
An RJ-45 connector with EIA-561 (RS-232) pinouts
•
A management interface (such as HyperTerminal) that supports VT-100 terminals
FXS/FXO ports
FXS: The FXS ports provide connections of up to 32 analog FXS devices on a 50- or 64-pin RJ-21X connector
located on the rear panel.
FXO: The FXO ports provide connections of up to 32 analog FXO devices on a 50- or 64-pin RJ-21X connec-
tor located on the rear panel.
Voice connectivity - FXS
B • Specifications
48
Hide quick links:
Advertisement
Table of Contents
