Perfectclean Treated Surfaces; Catalytic Enamelled Surfaces; Hob Controls - Miele H2160E Operating Instructions Manual

PerfectClean treated surfaces

PerfectClean surfaces have very good
non-stick properties and are much
easier to keep clean than conventional
enamel surfaces, if cleaned regularly.
Food can be taken off these surfaces
easily, and soiling from baking and
roasting is simple to remove.
Food can be sliced or cut up on
PerfectClean surfaces.
However, do not use ceramic knives
as these will scratch the
PerfectClean surface.
Surfaces treated with PerfectClean
enamel can be cleaned as you would
clean glass.
Read the instructions in "Cleaning and
care" so that the benefits of the
non-stick properties and easy cleaning
are retained.
The following have all been treated with
PerfectClean:
– Oven interior
– Universal tray
– Baking tray
– Anti-splash insert
– Round baking tray

Catalytic enamelled surfaces

The back panel is coated with catalytic
enamel. Soiling from oil and fat is burnt
off this surface when very high
temperatures are used in the oven.
See "Cleaning and care" for more
information.

Hob controls

(features will vary depending on model)
H2x6xE cookers also have cooking
zone controls for operating the cooking
zones on the linked hob.
All the hob cooking zone controls are
retractable when they are at the ß
position.
The range of settings is printed on the
control.
Cooking zones:
Symbol Cooking zone
D
front left
B
rear left
C
rear right
E
front right
The hob can still be operated when the
system lock for the oven is switched on
0.
Please read the separate operating and
installation manual provided with your
hob. It contains additional information
on how to install and use your hob.
Features
31