Advertisement
NOTE
If user scale the image by modify the number on the
toolbar, they then need click
When user scale or position setting by dragging the
edge of the image, the edge of the chosen Image1 or
Image2 (as follows: selected Image2) appears red
box, and the square has divide eight red points.
1). User can customize image or images position and
size just by drag and drop image (images) in this area:
2). User can also long press left mouse button and
drag the image to preliminary setting position, as
follows:
Address: S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone, Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Email: rgblinkcs@gmail.com
to output image.
Fax: 00865925771202
http://www.rgblink.cn
Step 5-Save
User can save the current parameters to Usermode1 or
Usermode2.
Step 6-Recall
User can recall the saved Usermode1 or Usermode2,
it is default Usermode1.
User can also recall the saved Usermode1 or
NOTE
Usermode2 through the icons below display bar.
Step 7-Factory Reset
When there is wrong operation during parameter
adjustment, users can recall the device and readjust the
parameter by factory reset, click the follow icons to
initiate factory reset.
VSP 628 Quick Start
Rev 1.1
Page 4 of 7
Advertisement
