Installation; Disassembling The Camera; Disassembling Ax68R/Ax78R - i3 International Ax68R/Ax78R User Manual

3. Installation

Ax68R/78R 360-degree Fisheye camera series is suitable for both indoor and outdoor
installations in commercial and residential environment.
The Ax68R/78R camera is suitable for surface installation without added equipment.
Available accessories:
DB78BB - back box, for surface, goose-neck, and pendant installations
DB60 - goose-neck bracket, used in conjunction with DB78BB in wall installations
DB78TSM - angle mount bracket for surface installations

3.1 Disassembling the Camera

Before mounting the camera, follow these steps to disassemble the camera.
Figure 2. Disassembling Ax68R/Ax78R
Step 4
Use a Phillips screwdriver to re-tighten the
safety lock screw.
i3-TRNG-CAMS-68R_78R.indd
Step 1
To expose the mounting screw holes,
the camera cover must first be removed.
Lift the safety lock screw cover to reveal
the safety lock screw.
Safety Lock Screw
(lift cover)
Step 2
Use a Phillips screwdriver to loosen
the safety lock screw, then grip the
camera cover and flex on one side,
towards the center.
Lift UP to remove.
Step 3
To re-attach the camera cover, match
up the safety lock screw with the screw
hole on the camera body
push straight down onto the camera
cover to engage the clips. The camera
cover will re-attach.
6
(10)
, then
Rev. 150505