Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
Press the PROCEED button on the remote control unit to
display the MAIN MENU on the screen, then...
1. Use the L and M buttons to select "PICTURE", then
press the PROCEED button. The "PICTURE" screen
2. Use the L and M buttons to select "CONTRAST".
P I C T U R E
3. Use the
buttons to adjust the contrast.
* If neither the
button is pressed within 5 seconds,
the current setting is set and the previous screen
4. Once the adjustment is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
Note: If "CAN NOT ADJUST" appears ...
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is set to MEMORY.
Picture adjustment screen
CONTRAST .... Changes the picture's contrast.
BRIGHTNESS . Changes the picture's brightness.
SHARPNESS .. Changes the picture's sharpness.
Adjusts picture detail of VIDEO
COLOR ........... Changes the color density.
TINT ................ Changes the picture's tint. Adjust for
natural colored skin, background, etc.
Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
Restoring the factory default settings
Select "RESET" under the "PICTURE MODE" settings.