NEC PlasmaSync 50MP1 User Manual page 126

41. Using the five screws SRW17, mount the VIDEO PWB A02 on the termi-
nal panel VIDEO M59.
In addition, use the two screws SRW202 and fasten the D-SUB terminal
block of the VIDEO PWB located on the side surface of the terminal
panel VIDEO. Use the eight screws SRW18 when fastening any other
terminal block.
42. Mount the MAIN PWB A01 on the terminal panel VIDEO, using the six
screws SRW16.
43. Apply the longer side of the terminal label A M56 to the location B of the
two screw holes, and stick it.
(Caution) The terminal label A M56 is used in part of the product series.
In regard to the servicing parts, use the terminal panel VIDEO
M59.
44. Mount the 232C PWB A08 on the terminal panel 232C M60, using the
four screws SRW20.
In addition, mount the terminal block by means of the two screws SRW106.
45. Mount the PANEL PWB A03 on the terminal panel 232C, using the two
screws SRW19.
In addition, mount the terminal block by means of the two screws SRW241.
46. Mount the C/L button M08 on the switch S2001 of the 232C PWB.
47. Apply the shorter side of the terminal label A to the location C of the two
screw holes, and stick it.
(Caution) The terminal label A M56 is used in part of the product series.
In regard to the servicing parts, use the terminal panel VIDEO
M59.
SRW16 x 6
M59
A01
SRW19 x 2
A03
S2001
SRW20 x 4
A08
M60
SRW17 x 5
B
SRW18 x 8
SRW202 x 2
D-SUB
M56
A02
C
SRW241 x 2
M08
SRW106 x 2
13