NEC PlasmaSync 50MP1 User Manual page 114

ASSENBLY/DISASSEMBLY
Disassembly shall be carried out in the reverse order of the assembly procedures described below.
1. Put the front panel M01 on an air cap or the like, with its rear side
facing the front and with its top side facing downwards. In this
case, the top side shall be positioned to face this side.
(Caution) Make sure not to hurt the front panel.
2. Mount the filter M52, pressing it against the mounting position ref-
erence A of the front panel.
3. Stick the spacer M51 to each of the four positions on the front
panel.
4. Stick the gasket M18 to the rear side of the bracket filters M38 and
M39.
5. Stick the gasket M19 to the rear side of the bracket filter M40.
A
M01
TOP
10±5
M38,39
M40 x 2
M52
10±5
RIB
M51 x 4
M18 x 2
M19 x 2
RIB
RIB
1