Table of Contents
Advertisement
TROUBLESHOOTING
1. Failure in the power supply
In the case of any abnormality in the power supply like no power available, go to "1. No power available" (P. 2).
2. Video error
(1) In the case of a video input error in VIDEO 1, 2, 3 (S-VIDEO), go to 2-1. "No video input signals available at
VIDEO 1, 2, 3 (S-VIDEO)" (P. 6).
(2) In the case of a video error in the RGB 1 and 2 input circuits, go to 2-2. "No video input signals available at the
RGB 1 and 2 input circuits (P. 9).
1
In this case, however, note the following:
If the error remains only in the interlace motion pictures, go to 2-5. "No interlace motion pictures gener-
2
ated for VIDEO, DVD, HDTV, etc." (P. 13).
If the error remains only in the progressive motion pictures, go to 2-6. "No progressive motion pictures
3
generated" (P. 14).
If the error remains only in the still pictures of PC, etc., go to 2-7. "No still pictures of PC, etc. generated"
(P. 15).
(3) In the case of a video error in the DVD/HD input circuit, go to 2-3. "No video signals available at the DVD/HD
input circuit (P. 10).
If this error remains only in the progressive motion pictures, go to 2-6. "No progressive motion pictures
generated" (P. 14).
(4) If a video error occurs irrespective of any input selection, go to 2-4. "No video pictures available even with
any input selection (P. 11).
(Caution) If there is a description of
to control the
are included.
and peripheral circuit in the flow chart, the circuits used
and the peripheral circuit (example: a bus from a microcomputer)
1
Advertisement
Chapters
Table of Contents
