Installing The Rear Shock Absorber Assembly - Orion AGB-21G Service Manual

REAR SHOCK ABSORBER AND SWINGARM
4. Check:
drive chain rollers 1
Damage/wear
drive chain side plates 2
Damage/wear
Cracks
sure that the battery breather hose is proper-
ly routed away from the drive chain and be-
low the swingarm.
5. Lubricate:
drive chain
6. Check:
drive sprocket
rear wheel sprocket
More than 1/4 tooth a wear
drive chain sprockets as a set.
Bent teeth
sprockets as a set.
b Correct
1 Drive chain roller
2 Drive chain sprocket
INSTALLING THE REAR SHOCK ABSORB-
ER ASSEMBLY
1. Install:
rear shock absorber assembly
NOTE:
When installing the rear shock absorber assem-
bly, lift up the swingarm.
5-40
Replace the drive chain.
Replace the drive chain.
Replace the drive chain and make
Recommended lubricant
Engine oil or chain lubricant
suitable for non-O-ring chains
Replace the drive chain
40 Nm(4.0 m • kg)