Orion AGB-21G Service Manual page 118

FRONT WHEEL AND REAR WHEEL
3. Install:
Rear wheel sprocket
Bolt (rear wheel sprocket)
25 Nm (2.5m · kg)
Washer (rear wheel sprocket)
Nut (rear wheel sprocket)
NOTE:
Tighten the nuts in stage, using a crisscross
pattern.
4. Install:
Left Collar
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
5. Install:
Right Collar
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
6. Install:
Wheel
NOTE:
Install the brake disc
pads correctly.
7. Install:
Drive chain
NOTE:
Push the wheel
chain.
5 - 8
between the brake
forward and install the drive