Table of Contents
Advertisement
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
Handlebar
Handlebar upper holder
Bolt (handlebar upper holder)
NOTE:
The handlebar upper holder should be
installed with the punched mark
First tighten the bolts on the front side of the
handlebar upper holder, and then tighten the
bolts on the rear side.
2. Install:
Left grip
Apply the adhesive to the handlebar
NOTE:
Before applying the adhesive, wipe off
grease or oil on the handlebar surface
with a lacquer thinner.
3. Install:
Right grip
Collar
Apply the adhesive on the tube guide
.
NOTE:
Before applying the adhesive, wipe off
grease or oil on the tube guide surface
with a lacquer thinner.
5 - 32
HANDLEBER
25 Nm (2.5 m · kg)
forward.
.
Hide quick links:
Advertisement
Table of Contents
