Table of Contents
Advertisement
FRONT WHEEL AND REAR WHEEL
7. Install:
Left drive chain puller
Wheel axle
NOTE:
Install the left drive chain puller, and insert
the wheel axle from left side.
Apply the lithium soap base grease on the
wheel axle.
8. Install:
Left drive chain puller
Bolt (wheel axle)
Adujust bolt (wheel axle)
NOTE:
Temporarily tighten the nut (wheel axle) at this
point.
9. Adjust:
Drive chain slack A
Drive chain slack:
30 ~ 40 mm
Refer
ADJUSTMENT" section in the CHAP-
TER 3.
10. Tighten:
Reft drive chain puller
Nut (wheel axle)
Locknut
5 - 9
to
"DRIVE
CHAIN
65 Nm (6.5 m kg)
·
12 Nm (1.2 m kg)
·
SLACK
Hide quick links:
Advertisement
Table of Contents
