FRONT FORK AND STEERING
4. Install:
Steering ring nut
Tighten the steering ring nut using the
steering nut wrench
Refer to "STEERING HEAD INSPEC-
TION AND ADJUSTMENT" section in
the CHAPTER 3.
5. Check the steering stem by turning it lock
to lock. If there is any binding, remove
the steering stem assembly and inspect
the steering bearings.
6. Install:
Lower
Upper bracket
Front fork
NOTE:
Temporarily tighten the pinch bolts (lower
bracket).
Do not tighten the pinch bolts (upper bracket)
yet.
7. Install:
Upper bracket
Washer
Steering stem nut
8. After tightening the nut, check the steer-
ing for smooth movement. If not, adjust
the steering by loosening the steering
ring nut little by little.
5 - 28
30 Nm (3 m · kg)
.
70 Nm (7.0 m · kg)