Orion AGB-21G Service Manual page 117

FRONT WHEEL AND REAR WHEEL
Rear wheel
1. Install:
Bearing (left)
Bearing (right)
Middle spacer
Oil seal
Left Collar
Right Collar
NOTE:
Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
Install the bearing with seal facing outward.
Use a socket that matches the outside diam-
eter of the race of the bearing.
Right side of bearing shall be installed first.
Install the oil seal with its manufacture's
marks or numbers facing outward.
CAUTION:
ACHTUNG:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
Brake disc
Bolt (brake disc)
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
5 - 7
14 Nm (1.4 m · kg)