Acer U5220 Series User Manual page 40

30
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
•
•
If you forget your administrator password, do the following
to retrieve the administrator password:
Security
•
•
Lock User Startup Screen
This function is set to "OFF" by default. If set to "ON", the
startup screen is locked and cannot be changed by the
"Startup Screen" and "Screen Capture" functions.
LAN/WiFi
The default value is "Off". Choose "On" to enable the LAN
connection.
LAN IP/Mask
LAN/WiFi
Identify IP and Mask address.
LAN Reset
Press
page to the default settings.
About LAN Setting
Note 1 : An overview of the remote network operation page
To switch
input signals,
click your
desired
signal.
Press to change "Administrator Password".
The factory default of "Administrator Password" is
"1234".
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
If the Security Card is lost, please contact your local Acer
service center.
after choosing "Yes" to return all items on the Tools
See Note 2 and
Note 3.
These buttons
function the
same as those
on the OSD
menus,
projector
control panel,
or remote
control.