Onscreen Display (OSD) Menus
The projector has multilingual Onscreen Display (OSD) menus that allow
you to make image adjustments and change a variety of settings.
Using the OSD menus
To open the OSD menu, press "MENU" on the control panel or remote
When the OSD is displayed, use
After selecting the desired main menu item, press
for feature setting.
to select the desired item and adjust the settings by using
Select the next item to be adjusted in the submenu and adjust as described
Press "MENU" on the control panel or remote control, the screen will
return to the main menu.
To exit the OSD menu, press "MENU" on the control panel or remote
control again. It will close and the projector will automatically save the
Note: Some of the following OSD settings may not be available. Please refer
to the actual OSD of your projector.
to select an item in the main menu.
to enter a submenu