Us Fcc Compliance & Iec/En 55011 Compliance - Nustep T4R User Manual

US FCC Compliance & IEC/EN 55011 Compliance
US FCC Compliance Statement:
Note: This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can generate radio frequency energy and, if not installed and used
in accordance with the installation instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference may not occur in a
particular installation. If the equipment causes harmful interference to radio or television
reception, which can be determined by turning this equipment off and on, the user is
encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit which is different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IEC/EN 55011 Compliance Statement:
This device complies with IEC/EN 55011, Group 1, Class B. Group 1 contains all ISM equipment
in which there is intentionally generated and/or used conductively coupled radio-frequency
energy which is necessary for the internal functioning of the equipment itself. Class B
equipment is suitable for use in domestic establishments and in establishments directly
connected to the low voltage power supply network which supplies buildings used for
domestic purposes.
European Authorized Representative
Emergo Europe
Molenstraat 15
6513 BH The Hague
The Netherlands
Tel: +31 (0)70 345 8570
Fax: +31 (0)70 346 7299
31