Console Confi Guration And System Information - Nustep T4R User Manual

Setting Date and Time
To set the console date and time, press the SELECT and AVG buttons simultaneously. Adjust
the fi elds using the (PACE PARTNER) - and + buttons. Use the SELECT button to cycle
through the fi elds. Press and hold the SELECT button to save the new date and time.
English and Metric Units
Press the WEIGHT + or WEIGHT - button. The currently confi gured weight will be displayed
along with either an "LB" or "KG" icon. Simultaneously press the WEIGHT + and WEIGHT -
buttons to switch between English and metric units of measure.
Reset to Factory Defaults
To return the console confi guration to factory defaults, press and hold the RESET button until
the screen goes blank.
View System Information
To view system information for the T4r, press the SELECT and QUICK START buttons
simultaneously. Using the (PACE PARTNER) - and/or + buttons, you may cycle through with
the following system information screens:
• Date and time
• Total hours of use
• Total hours of Pace Partner program use
• Total number of steps taken
• Total number of fi le writes to USB fl ash drive
• Product serial number
• Software boot loader version
• Console software version
13