IBC Qscan User Manual page 55

Qscan User's Guide Version 1.4
Display Commands
D xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Displays up to 32 characters on the display (2 lines of 16 characters
each). Note the display is not cleared prior to displaying data, so any
character position not overwritten will remain as it was. You can send any
number of characters, up to 32.
d xxxxxxxxxxxxxxxx
Displays up to 16 characters on line 2 of the display. Note the display is
not cleared prior to displaying data, so any character position not over-
written will remain as it was. You can send any number of characters, up
to 16.
Digital Input Commands
%
Returns the status of Input 1 ( ON or OFF )
$
Returns the status of Input 2 ( ON or OFF )
Page