Aamva - IBC Qscan User Manual

Aamva Control
X032 a b
a Aamva required
b Field Masking
Aamva is the standard for drivers licenses in the US and Canada. Turn
the Aamva Required option on (a=1) to restrict the reading of pdf417
barcodes to Aamva only. If on, no pdf417 barcodes will be read unless
they meet the Aamva format. This setting has no effect on other barcode
symbologies.
When Aamva field masking is on (b=1) , each field from the Aamva
drivers license is parsed. You can then use the Aamva field commands to
concatenate fields together.
Aamva Field Commands
X033 ff ll ttt ff ll ttt
X034 ff ll ttt ff ll ttt
X035 ff ll ttt ff ll ttt
X036 ff ll ttt ff ll ttt
X037 ff ll ttt ff ll ttt
ff Field to extract
ll Field length
ttt terminator character
These commands select the fields which will be extracted and processed.
Fields are extracted in the order of extraction # ( 1 first, 10 last). If
the field length is set to non 0, then if the field is larger than the value
specified, it is truncated. If smaller, it is left justified and blank filled.
The terminator character (if non 0) is appended to the field value. ttt is
entered as a 3-digit decimal ascii value (065="A", 053="5").
Qscan User's Guide
0=no 1=yes
0=off 1=on
Extractions 1-2
Extractions 3-4
Extractions 5-6
Extractions 7-8
Extractions 9-10
see table next page
1-20
000=none
Version 1.4
000=none
0=actual
Page 1