Digital Inputs And Arming Loop; Serial Settings - IBC Qscan User Manual

Digital Inputs for Led or Arming Loop use
X029 i p a b
i input 1
p input 1 polarity
a input 2
b iinput 2 polarity
The digital inputs can be used to control either of the leds, or used for an arming
loop.
Normal polarity is active low.
Serial Settings (rs232 only)
X028 b p tt1 tt2
b baud rate
p parity
tt1 terminator 1
tt2 terminator 2
Baud Rate settings can be:
1-1200
2-2400
3-4800
4-9600
5-19200
6-38400
7-57600
8-115200
Parity can be 1=8 bits no parity, 2=7 even, 3=7 odd.
The terminator character(s) can be any decimal ascii character, i.e. 065="A". 000
means no terminator.
0=off 1=bicolor led
0=normal
0=off 1=bicolor led
0=normal
1 thru 8
1 thru 3
000 thru 255
000 thru 255
Qscan User's Guide
2=right led 3=arm loop
1=reverse
2=right led 3=arm loop
1=reverse
see table below
see table below
Version 1.4
Page 1