IBC Qscan User Manual page 30

Wiegand Format # 1 (barcode) Site Override
X018 ssss
ssss site override
This command sets the site override value for wiegand format # 1 for
barcode data.
This command specifies the site override value for wiegand format # 1 for use
with barcode data. If the site override option is on, then the site field data is
replaced with the ("ssss") value. ("ssss") is programmed as 4 hexadecimal
characters, representing 16 bits. If the site field is larger than 16 bits, the
("ssss") data will be right justified in a zero filled field. If the site field is smaller
than 16 bits, then the lowest bits in the override value are used up to the size
of the site field.
Wiegand Format # 2 (barcode) Site Override
X022 ssss
ssss site override
This command sets the site override value for wiegand format # 2 for
barcode data.
hexadecimal
hexadecimal
Qscan User's Guide Version 1.4
Page 0