IBC Qscan User Manual page 49

Example programming two prox formats. The first format is a 26 bit input which will
be transmitted as a 26 bit output. The second format will be a 34 bit input ( 1 parity,
16 site, 16 id, 1 parity) retransmitted as a 26 bit output. The passthru option
cannot be used in this case because the passthru option applies to all bit formats.
The transformation from 34 to 26 bits is ok in this case because all of the known
cards in the field utilize site codes below 255.
X048 026 002 08 0 010 16 0
X049 000 00 0 03 05 00
X060 01 03 04 05 00 00
X061 08 16 00 0 0 0 012 012
X062 1 2 0 0000 00
X050 034 002 16 0 018 16 0
X051 000 00 0 03 05 00
X063 01 03 04 05 00 00
X064 08 16 00 0 0 0 012 012
X065 1 2 0 0000 00
Command Notes:
If site start position ("ss") is 00, then no site code is extracted from the intermediate
data. You may still include bits in the output format for the site code, except the site
code data will be 0, unless you have programmed a site override.
If site code digits ("sd") is set to 00, then all remaining digits in the intermediate
data are used for the site code.
If id start position ("is") is 00, then no id is extracted from the intermediate data.
You may still include bits in the output format for the id, except the id will default to
0.
If id digits ("il") is set to 00, then all remaining digits in the intermediate data are
used for the id.
If issue code start position ("us") is 00, then no issue code is extracted from the
intermediate data. You may still include bits in the output format for the issue code,
except the issue code data will default to 0.
If issue code digits ("ul") is set to 00, then all remaining digits in the intrmediate
data are used for the issue code.
If site code bits ("sb") is set to 00, then there will be no site bits in the output.
If id bits ("ib") is set to 00, then there will be no id bits in the output.
Qscan User's Guide Version 1.4
Page