Barcode Masking - IBC Qscan User Manual

Barcode Masking

X010 xx ctt llnn r
X011 xx ppp sss1 b lll
X012 xx iii sss2 y ll2 sss
xx mask number
ctt barcode type
llnn barcode length
r passthru
ppp prefix character
sss1 start position 1
b backwards
lll extraction length
iii inter character
sss2 start position 2
y backwards
ll2 extraction length
sss suffix character
All 3 commands need to be processed by the reader to properly set a
mask.
Masking must be explicitly turned on with the X012 command on page
xxx.
The value for prefix, suffix, and inter character is represented in
decimal ascii form (041 = "A", 039 = "9").
If b (or y) is set to a 1, then the extracted data starts at a position
"start position" relative to the end of the barcode.
See the following pages for a detailed explanation and examples.
If needed, all masks can be cleared with one command. See the X014
command on page 25.
Qscan User's Guide
01 thru 10
see list on next page
0000=all lengths
0=off
000=none
0000=none
0=no
000=all
000=none
0000=none
0=no
000=all
000=none
Version 1.4
max=1500
1=on
1=yes
max=200
1=yes
max=200
Page 1