Vitrifrigo FG10I VFAU User Manual page 17

The refrigerator must be used only with the provided tank, in any case with
closed milk containers. The refrigerator can be started and adjusted using the
thermostat placed on the back.
If the thermostat is set to OFF, the refrigerator is switched off. Moving the
thermostat to MIN will start the refrigerator. The optimum temperature
adjustment range for the application for which the FG10I VFAU refrigerator is
designed, is between the MIN and MAX settings marked on the thermostat.
As the thermostat is moved closer to the MAX position, the temperature
inside the refrigerator will become lower.
NOTE: The refrigerator can operate at lower temperatures than the level
obtained by setting the thermostat to MAX by turning the dial
clockwise past this setting and as far as it will go. However, since
these temperatures are out of the envisaged range for storing milk
or similar liquids for human consumption, the manufacturer advises
against using the refrigerator in this way, stressing again that the
appliance is designed and made to store milk or similar liquids for
human consumption at a controlled temperature and not to chill such
products from room temperature.
Adjusting the thermostat acts indirectly on the inside temperature of the
refrigerator. In the FG10I VFAU model, the internal temperature is also shown
by a thermometer.
Once switched on, the refrigerator will begin to operate, but a certain
EN
17