Install The Base Unit Directly On A Wall - Avaya 3810 Installation And Use Manual

Installation and Use

Install the Base Unit Directly on a Wall

This section provides procedures to mount the base unit directly on a wall if a
standard wall plate is not installed. Use #10 screws and, if necessary, anchoring
devices that are suitable for the wall material where the base unit will be placed.
!
CAUTION:
Do not mount the base unit on the ceiling.
Insert two mounting screws into the wall 3 and 15/16 inches apart. Allow
1
about 3/16 of an inch between the wall and screw heads for mounting the
base unit.
Figure 10: Insert Mounting Screws
2 Installing the Telephone
Install the Base Unit Directly on a Wall 17