Install The Base Unit On A Standard Wall Plate - Avaya 3810 Installation And Use Manual

2 Installing the Telephone

Install the Base Unit on a Standard Wall Plate

This section provides procedures to mount the base unit on the wall if a standard
wall plate, with a telephone jack connected to the communications system, is
installed in the wall.
If you want to mount the base unit on the wall and a standard wall plate is not
installed, go to "Install the Base Unit Directly on a Wall" on page
!
CAUTION:
Do not mount the base unit on the ceiling.
To attach the wall mount stand to the base unit, slide the wall mount stand
1
into the notches at the top of the base unit. Then pull the wall mount stand
down and snap it into place.
14 Install the Base Unit on a Standard Wall Plate
Figure 5: Attach Wall Mount Stand to Base Unit
Installation and Use
17.