Advertisement
_ Electronic Ovens _ rev. 0 ________________________________________________________________EKF 711 EV _
3.2.2
3.2.2 Programming cooking time
3.2.2
3.2.2
Programming cooking time
Programming cooking time
Programming cooking time
To set the cooking time (from 1 minute to 4 hours) use the knob no. "1". The set values can
be seen on the time display.
time display.
time display.
time display.
3.2.3 Programming cooking temperature
3.2.3
3.2.3
3.2.3
Programming cooking temperature
Programming cooking temperature
Programming cooking temperature
To set the cooking temperature (between 50°C and 270 °C in the cooking chamber and
between 0°C and 100°C for the "∆T" and the core probe) use the knob no. "2". The set values
can be seen on the temperature display.
3.2.4 Programming cooking climate
3.2.4
3.2.4
3.2.4
Programming cooking climate
Programming cooking climate
Programming cooking climate
To set the cooking climate (dry or steam) use knob no. "3". The set value in percentage is
shown on the led bar
led bar formed of: 10
led bar
led bar
The white led shows when the climate function is not activated.
3.2.5
3.2.5 Selecting cooking stage
3.2.5
3.2.5
Selecting cooking stage
Selecting cooking stage
Selecting cooking stage
To select the cooking stage (from 1 to 4) press the push button
up it shows the stage has been selected. The required cooking parameters (time/temperature/
climate) can be set for each selected stage.
climate) can be set for each selected stage. The push button can be pressed at any time to
climate) can be set for each selected stage.
climate) can be set for each selected stage.
check the time for each cooking stage.
When the oven is operating, the remaining cooking time can be seen for all 4 stages on the
time display (the flashing led shows which cooking phase is actually in progress).
An "infinite" time can be set in the 1
clockwise direction): the time display shows the wording "inF
which is useful for keeping the food hot when it is cooked). The other stages cannot be selected
in these cases.
3.2.6 Selecting cookin
3.2.6
3.2.6
3.2.6
Selecting cooking temperature
Selecting cookin
Selecting cookin
To select the cooking temperature (in the cooking chamber / core probe "∆T") press the
push button
. When the green led lights up it shows the selected temperature, which can be
seen on the temperature display
temperature display
temperature display.
temperature display
Temperature in the cooking chamber
Temperature in the cooking cha
Temperature in the cooking cha
Temperature in the cooking cha
cooking chamber is automatically selected (led alight on
no. "2". When the oven is operating, the set temperature (led alight on ) and the current
temperature in the cooking chamber (led alight on
Core temperature in the food
Core temperature in the food
Core temperature in the food: : : : To set the temperature for cooking inside the food, press the
Core temperature in the food
push button
until the led next to the
When the oven is working (with the needle probe inside the food) the set temperature (led
alight on
) and the current temperature inside the food (led alight on
shown.
∆ ∆ ∆ ∆ T temperature (DELTA
T temperature (DELTA- - - - T) T) T) T): To set the temperature for the "∆T" function, press the push
T temperature (DELTA
T temperature (DELTA
button
until the led lights up next to the ∆ ∆ ∆ ∆ T T T T symbol and then turn knob no. "2". When the
oven is working (with the needle probe inside the food) the current temperature in the cooking
chamber (led alight on
shown.
N.B.:
N.B.: If the cooking chamber temperature and the core temperature for the food are set, the "∆T"
N.B.:
N.B.:
temperature function is automatically deactivated.
If the core temperature for the food is set and then the "∆T" temperature, the cooking chamber
temperature function is automatically deactivated.
_________________________________________________________________________________________ page 13 _
temperature display.
temperature display.
temperature display.
10 blue leds
blue leds (from 10% to 100%) for the steam
10
10
blue leds
blue leds
g temperature
g temperature
g temperature
mber: When the oven is turned on the temperature in the
mber
mber
) and the set temperature for "∆T" (led alight on ∆ ∆ ∆ ∆ T T T T ) are alternatively
The required cooking parameters (time/temperature/
The required cooking parameters (time/temperature/
The required cooking parameters (time/temperature/
st
th
and 4
stages (turn the knob no. "1" in an anti-
inF " (1
inF
inF
) . To set the required level turn knob
) are alternatively displayed.
symbol lights up and then turn knob no. "2".
steam selection.
steam
steam
. When the green led lights
st
stage) or "HoLd
HoLd" (4
HoLd
HoLd
) are alternatively
th
stage –
Advertisement
